Awake and up at the crack of dawn for the boat survey. (OK you have to understand that crack of dawn when you are retired means 7.30 am.) Captain Steve Danzig came for 2 hours, charged me $416 and did a great job. He said and I quote.
The vessel is in Above Average condition given she is 41 years old. All systems, electrical, fuel, etc. if tested operated without hesitation. The care and maintenance of this vessel has been above the average usually seen in the industry.
The one thing that I have to do, is replace the electrical receptacle in the head with one that is GFIC Ground Fault Interrupted. So now i should be able to get liability insurance from Boat US.
The rest of the day, I scraped the bottom with a scraper and then a drywall screen using the hose.
It is pouring with rain here in north east Florida but tomorrow is meant to be sunny so it will be perfect for painting the bottom with an ablative paint.
Saturday is splash day!
Thursday, January 15, 2015
Wednesday, January 14, 2015
Day 3 in the yard
I managed to overcome the bent boomkin by adding some shims and the result is that the windvane is now vertical. I went onto painting some of my topsides that were scratched up during a violent thunderstorm back when I was docked in New Bern, NC. I then transferred all my tools into a Husky tool bag that fits perfectly under the bottom step above the bilge.
Time for exercise, dinner and meditation.
Tuesday, January 13, 2015
Day 2 in the work yard
Got a lot of little housekeeping things done today. I arranged for a pump out here at Green Cove Springs Marina. They have a mobile pump on a trailer that pulls up beside your boat to pump it out.
I also set 4 bug traps. Even though I have seen just 3 cockroaches in the time I have had the boat, they were scary events and 3 too many. I have seen these sticky Tom Cat traps work and they are very effective so I buried 4 of them deep in the bilges where no man dares to go.
I cleaned the bilge and filled up the water tanks.
I also arranged for a survey of the boat to be done on Thursday. Currently I carry no insurance but want to get liability insurance just in case I run into a gin palace or 2 on my travels. BoatUS wanted a survey of the boat first, which is a good thing, in my mind. It will run $416, about the same as the yearly insurance itself. Tomorrow I plan on starting the engine, firing up the propane stove, installing covers over the house batteries, re-installing the windvane and getting started on sanding the keel.
I also set 4 bug traps. Even though I have seen just 3 cockroaches in the time I have had the boat, they were scary events and 3 too many. I have seen these sticky Tom Cat traps work and they are very effective so I buried 4 of them deep in the bilges where no man dares to go.
I cleaned the bilge and filled up the water tanks.
I also arranged for a survey of the boat to be done on Thursday. Currently I carry no insurance but want to get liability insurance just in case I run into a gin palace or 2 on my travels. BoatUS wanted a survey of the boat first, which is a good thing, in my mind. It will run $416, about the same as the yearly insurance itself. Tomorrow I plan on starting the engine, firing up the propane stove, installing covers over the house batteries, re-installing the windvane and getting started on sanding the keel.
Monday, January 12, 2015
Back at Green Cove Springs Marina again after a wonderful Holiday
I arrived back at the boat last night and fortunately the boat was absent any sign of water inside despite all the rain. It was rainy off and on all day and I have been running the heater to help remove that clammy feeling. Firstly I tidied up the insides and removed the shade cloth.
I ordered new bottom ablative paint, an Interlux Micron 66 that I had success with last year at keeping the barnacles at bay.
I also have to re-install my monitor wind-vane. When I was in Southport, NC, I bent the gears on the paddle so when I drove out to California in November, I visited Scanmar in San Francisco, and they fixed it for me. Robert is holding the bent piece that was replaced.
The boomkin in the next photo is bent slightly, so that when I reinstall the windvane, I need to work out how to make it vertical.
Finally, I also have to fix my genoa port track, the front part of which which snapped back outside Savannah.
Garbanzo beans, avocado, veggies with blueberries, yogurt and Chamomile tea for dinner.
I ordered new bottom ablative paint, an Interlux Micron 66 that I had success with last year at keeping the barnacles at bay.
I also have to re-install my monitor wind-vane. When I was in Southport, NC, I bent the gears on the paddle so when I drove out to California in November, I visited Scanmar in San Francisco, and they fixed it for me. Robert is holding the bent piece that was replaced.
The boomkin in the next photo is bent slightly, so that when I reinstall the windvane, I need to work out how to make it vertical.
Finally, I also have to fix my genoa port track, the front part of which which snapped back outside Savannah.
Garbanzo beans, avocado, veggies with blueberries, yogurt and Chamomile tea for dinner.
Monday, December 22, 2014
Interlude for Chain Plates and Stanchions
After putting my Westsail 32, Onapua on the hard in the Green Cove springs Marina long term storage, I drove out to California and spent some glorious weeks with my new grandson. I am now on my way up to Canada, for a family reunion at my Aunt and Uncle's place but on the way I stopped in to see my old crew, John in Deale, MD to see how progress was being made on his Westsail 32.
He is rebuilding his boat from scratch and doing a mighty fine job of it. He installed a new Beta Marine engine, repainted the hull, ordered new sails from Kern and rigging from Bud Taplan. He has replaced his caprail, redone his hatches and is basically building up the boat so that it is new again.
I helped him install new chain plates on the boat which now I see how relatively easy and inexpensive it is, I plan on doing on my boat.
We used a jigsaw and chisels to cut out part of the caprail.
BTW John has told me that his new year's resolution is to give up the dreaded habit and start exercising.
The key to successfully installing the chain plates is with this extended 9/16th self ratcheting tool to reach up into difficult places on the inside.
We also installed his new stanchions on the outside bulwark.
We had to cut part of the caprail with a hole saw to install them.
All in all, I would say that the worst part of the whole job was the cold weather.
You CAN work outside on your boat in the cold wintertime, but you really have to be motivated, and if at all possible, it is better to have your boat in a place like Florida where the weather is not an issue.
I hope to have my boat out of storage next month and after a mini refit, go cruising down the East coast of Florida and then who knows where?
Hope you have a wonderful Holiday and an inspired New Year!
Thursday, October 30, 2014
Bye for Now - Family Calls
I am putting Onapua up on the hard here at Green Cove Springs. I pulled all the sails off and wrapped her up with shade cloth so hopefully she will be well protected while I am gone.
Life is what happens to you while you're busy making other plans
Subscribe to:
Posts (Atom)
